AESUB White Scanning Spray

AESUB white contains pigments, propellant and solvent and has been optimized with regards to material compatibility. AESUB white sets new standards by optimizing the surface's homogeneity and reducing layer thickness. Unlike traditional sprays, AESUB white is free of titanium dioxide, associated with cancerogenic incidents through inhalation by the European Chemicals Agency.

AESUB White Scanning Spray Features

• Semi-permanent state of the art scanning spray
• Free of titanium dioxide nano particles (TiO2)
• Thin and homogenous coating
• Developed and approved by scanning experts

AESUB White Scanning Spray Usage

Spray

Apply AESUB White from 15-20 cm away. Spray over the entire surface that you will be scanning. Gently push down the spray button and move the can across the area using even, back and forth strokes. Move at a consistent pace without pausing at one point to achieve an even coat. Once the coat is applied, you can scan the object in usual manner.

AESUB White is applied "wet". The solvent vanishes within a few seconds while the pigments remain as coating on the surface. Increase spraying distance or pace in case of drop formation or when coat remains "wet" for too long. Note that multiple spraying increases layer thickness. The ideal ambient temperature is 21°C/69.8°F.

Make sure not to spray next to your sensors and sensible equipment, as AESUB white is a permanent scanning spray containing pigments that will contaminate the nearby environment. Utilize the sublimating scanning spray AESUB blue to avoid pigment-contamination.

Scan

Scan can be started as soon as you have a stable & white coating. 3D scan the object in the usual manner.

Clean

Coated parts need to be cleaned or disposed after scanning. AESUB White was developed to allow easy cleaning. Utilize a soft brush in combination with water and a towel to clean coated parts.