AESUB
AESUB Yellow Scanning Spray
AESUB yellow is a self-volatilizing scanning spray liquid developed by scanning experts. It eliminates basic application problems of 3D metrology, especially in sensitive areas (laboratories, production, etc.) and protects the equipment from contamination by pigment deposition. Expensive transports of externally matted measuring objects to the sensor as well as the time-consuming cleaning of the measuring environment and objects after scanning are no longer necessary.
Price range: £410.00 through £684.00 ex. VAT
AESUB Yellow Scanning Spray Features
- Self-vanishing scanning spray - No cleaning of object, system and surroundings!
- To be used with an air brush, it is perfect for small scale scanning applications
- Sublimation time (2-4 hours)
- Superfine, down to 0.5 microns (µm)
- Free of pigments
- Easy to use
- Homogeneous spray pattern
- Reference points stick on the coating
- No odour annoyance
- Comes in 200ml bottles
AESUB Yellow Scanning Spray Usage
Spray
Apply AESUB Yellow from a distance of 5-10 cm. Spray evenly, with the nozzle directed at the object, slowly back and
forth to obtain a uniform coating.
AESUB Yellow is applied "wet on wet" in a crosshatch pattern. The solvent evaporates within a few seconds, while the active ingredient remains as a coating on the surface. The whiteness level of the coating increases with the progressing evaporation of the solvent.
The complete evaporation occurs after approximately 1-2 minutes. If drops form on the component or the applied matting remains "wet" for a longer time, increase the spraying distance or speed. The ideal ambient temperature is 21°C/69.8°F.
Scan
After AESUB Yellow has fully dried, the object can be scanned as usual. If necessary, reference markers can be applied to the sprayed surface.
Done
The applied layer of AESUB yellow evaporates automatically after scanning. The otherwise laborious cleaning after use is eliminated.
Additional information
| Order Amount | 12 pack, 24 pack |
|---|
